Struct aster_frame::mm::DmaCoherent

impl DmaCoherent

pub fn map( vm_segment: Segment, is_cache_coherent: bool ) -> Result<Self, DmaError>

Creates a coherent DMA mapping backed by vm_segment.

The is_cache_coherent argument specifies whether the target device that the DMA mapping is prepared for can access the main memory in a CPU cache coherent way or not.

The method fails if any part of the given vm_segment already belongs to a DMA mapping.

impl<'a> DmaCoherent

pub fn reader(&'a self) -> VmReader<'a>

Returns a reader to read data from it.

pub fn writer(&'a self) -> VmWriter<'a>

Returns a writer to write data into it.

Methods from Deref<Target = Segment>§

pub fn range(&self, range: Range<usize>) -> Self

Returns a part of the Segment.

Panics

If range is not within the range of this Segment, then the method panics.

pub fn start_paddr(&self) -> Paddr

Returns the start physical address.

pub fn end_paddr(&self) -> Paddr

Returns the end physical address.

pub fn nframes(&self) -> usize

Returns the number of page frames.

pub fn nbytes(&self) -> usize

Returns the number of bytes.

pub fn as_ptr(&self) -> *const u8

Returns a raw pointer to the starting virtual address of the Segment.

pub fn as_mut_ptr(&self) -> *mut u8

Returns a mutable raw pointer to the starting virtual address of the Segment.

pub fn reader(&'a self) -> VmReader<'a>

Returns a reader to read data from it.

pub fn writer(&'a self) -> VmWriter<'a>

Returns a writer to write data into it.

Trait Implementations§

impl Clone for DmaCoherent

fn clone(&self) -> DmaCoherent

Returns a copy of the value. Read more

1.0.0§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for DmaCoherent

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl HasDaddr for DmaCoherent

fn daddr(&self) -> Daddr

Gets the base address of the mapping in the device address space.

impl HasPaddr for DmaCoherent

fn paddr(&self) -> Paddr

Returns the physical address.

impl VmIo for DmaCoherent

fn read_bytes(&self, offset: usize, buf: &mut [u8]) -> Result<()>

Reads a specified number of bytes at a specified offset into a given buffer. Read more

fn write_bytes(&self, offset: usize, buf: &[u8]) -> Result<()>

Writes a specified number of bytes from a given buffer at a specified offset. Read more

fn read_val<T: Pod>(&self, offset: usize) -> Result<T>

Reads a value of a specified type at a specified offset.

fn read_slice<T: Pod>(&self, offset: usize, slice: &mut [T]) -> Result<()>

Reads a slice of a specified type at a specified offset. Read more

fn write_val<T: Pod>(&self, offset: usize, new_val: &T) -> Result<()>

Writes a value of a specified type at a specified offset.

fn write_slice<T: Pod>(&self, offset: usize, slice: &[T]) -> Result<()>

Writes a slice of a specified type at a specified offset. Read more

fn write_vals<'a, T: Pod + 'a, I: Iterator<Item = &'a T>>( &self, offset: usize, iter: I, align: usize ) -> Result<usize>

Writes a sequence of values given by an iterator (iter) from the specified offset (offset). Read more

impl Deref for DmaCoherent

type Target = Segment

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

Auto Trait Implementations§

impl UnwindSafe for DmaCoherent

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> Conv for T

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of [From]<T> for U chooses to do.

impl<D> OwoColorize for D

fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>
where C: Color,

Set the foreground color generically Read more

fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>
where C: Color,

Set the background color generically. Read more

fn black<'a>(&'a self) -> FgColorDisplay<'a, Black, Self>

Change the foreground color to black

fn on_black<'a>(&'a self) -> BgColorDisplay<'a, Black, Self>

Change the background color to black

fn red<'a>(&'a self) -> FgColorDisplay<'a, Red, Self>

Change the foreground color to red

fn on_red<'a>(&'a self) -> BgColorDisplay<'a, Red, Self>

Change the background color to red

fn green<'a>(&'a self) -> FgColorDisplay<'a, Green, Self>

Change the foreground color to green

fn on_green<'a>(&'a self) -> BgColorDisplay<'a, Green, Self>

Change the background color to green

fn yellow<'a>(&'a self) -> FgColorDisplay<'a, Yellow, Self>

Change the foreground color to yellow

fn on_yellow<'a>(&'a self) -> BgColorDisplay<'a, Yellow, Self>

Change the background color to yellow

fn blue<'a>(&'a self) -> FgColorDisplay<'a, Blue, Self>

Change the foreground color to blue

fn on_blue<'a>(&'a self) -> BgColorDisplay<'a, Blue, Self>

Change the background color to blue

fn magenta<'a>(&'a self) -> FgColorDisplay<'a, Magenta, Self>

Change the foreground color to magenta

fn on_magenta<'a>(&'a self) -> BgColorDisplay<'a, Magenta, Self>

Change the background color to magenta

fn purple<'a>(&'a self) -> FgColorDisplay<'a, Magenta, Self>

Change the foreground color to purple

fn on_purple<'a>(&'a self) -> BgColorDisplay<'a, Magenta, Self>

Change the background color to purple

fn cyan<'a>(&'a self) -> FgColorDisplay<'a, Cyan, Self>

Change the foreground color to cyan

fn on_cyan<'a>(&'a self) -> BgColorDisplay<'a, Cyan, Self>

Change the background color to cyan

fn white<'a>(&'a self) -> FgColorDisplay<'a, White, Self>

Change the foreground color to white

fn on_white<'a>(&'a self) -> BgColorDisplay<'a, White, Self>

Change the background color to white

fn default_color<'a>(&'a self) -> FgColorDisplay<'a, Default, Self>

Change the foreground color to the terminal default

fn on_default_color<'a>(&'a self) -> BgColorDisplay<'a, Default, Self>

Change the background color to the terminal default

fn bright_black<'a>(&'a self) -> FgColorDisplay<'a, BrightBlack, Self>

Change the foreground color to bright black

fn on_bright_black<'a>(&'a self) -> BgColorDisplay<'a, BrightBlack, Self>

Change the background color to bright black

fn bright_red<'a>(&'a self) -> FgColorDisplay<'a, BrightRed, Self>

Change the foreground color to bright red

fn on_bright_red<'a>(&'a self) -> BgColorDisplay<'a, BrightRed, Self>

Change the background color to bright red

fn bright_green<'a>(&'a self) -> FgColorDisplay<'a, BrightGreen, Self>

Change the foreground color to bright green

fn on_bright_green<'a>(&'a self) -> BgColorDisplay<'a, BrightGreen, Self>

Change the background color to bright green

fn bright_yellow<'a>(&'a self) -> FgColorDisplay<'a, BrightYellow, Self>

Change the foreground color to bright yellow

fn on_bright_yellow<'a>(&'a self) -> BgColorDisplay<'a, BrightYellow, Self>

Change the background color to bright yellow

fn bright_blue<'a>(&'a self) -> FgColorDisplay<'a, BrightBlue, Self>

Change the foreground color to bright blue

fn on_bright_blue<'a>(&'a self) -> BgColorDisplay<'a, BrightBlue, Self>

Change the background color to bright blue

fn bright_magenta<'a>(&'a self) -> FgColorDisplay<'a, BrightMagenta, Self>

Change the foreground color to bright magenta

fn on_bright_magenta<'a>(&'a self) -> BgColorDisplay<'a, BrightMagenta, Self>

Change the background color to bright magenta

fn bright_purple<'a>(&'a self) -> FgColorDisplay<'a, BrightMagenta, Self>

Change the foreground color to bright purple

fn on_bright_purple<'a>(&'a self) -> BgColorDisplay<'a, BrightMagenta, Self>

Change the background color to bright purple

fn bright_cyan<'a>(&'a self) -> FgColorDisplay<'a, BrightCyan, Self>

Change the foreground color to bright cyan

fn on_bright_cyan<'a>(&'a self) -> BgColorDisplay<'a, BrightCyan, Self>

Change the background color to bright cyan

fn bright_white<'a>(&'a self) -> FgColorDisplay<'a, BrightWhite, Self>

Change the foreground color to bright white

fn on_bright_white<'a>(&'a self) -> BgColorDisplay<'a, BrightWhite, Self>

Change the background color to bright white

fn bold<'a>(&'a self) -> BoldDisplay<'a, Self>

Make the text bold

fn dimmed<'a>(&'a self) -> DimDisplay<'a, Self>

Make the text dim

fn italic<'a>(&'a self) -> ItalicDisplay<'a, Self>

Make the text italicized

fn underline<'a>(&'a self) -> UnderlineDisplay<'a, Self>

Make the text italicized

fn blink<'a>(&'a self) -> BlinkDisplay<'a, Self>

Make the text blink

fn blink_fast<'a>(&'a self) -> BlinkFastDisplay<'a, Self>

Make the text blink (but fast!)

fn reversed<'a>(&'a self) -> ReversedDisplay<'a, Self>

Swap the foreground and background colors

fn hidden<'a>(&'a self) -> HiddenDisplay<'a, Self>

Hide the text

fn strikethrough<'a>(&'a self) -> StrikeThroughDisplay<'a, Self>

Cross out the text

fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the foreground color at runtime. Only use if you do not know which color will be used at compile-time. If the color is constant, use either OwoColorize::fg or a color-specific method, such as OwoColorize::green, Read more

fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the background color at runtime. Only use if you do not know what color to use at compile-time. If the color is constant, use either OwoColorize::bg or a color-specific method, such as OwoColorize::on_yellow, Read more

fn fg_rgb<const R: u8, const G: u8, const B: u8>( &self ) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the foreground color to a specific RGB value.

fn bg_rgb<const R: u8, const G: u8, const B: u8>( &self ) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the background color to a specific RGB value.

fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>

Sets the foreground color to an RGB value.

fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>

Sets the background color to an RGB value.

fn style(&self, style: Style) -> Styled<&Self>

Apply a runtime-determined style

impl<T> Pipe for T
where T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> R
where Self: BorrowMut, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.

impl<T> Pointee for T

type Metadata = ()

The type for metadata in pointers and references to Self.

impl<T> TagTrait for T
where T: Pointee<Metadata = ()>,

fn dst_size(_: &Tag) -> <T as Pointee>::Metadata

Returns the amount of items in the dynamically sized portion of the DST. Note that this is not the amount of bytes. So if the dynamically sized portion is 16 bytes in size and each element is 4 bytes big, then this function must return 4.