Struct aster_frame::sync::SpinLock

impl<T> SpinLock<T>

pub const fn new(val: T) -> Self

Creates a new spin lock.

impl<T: ?Sized> SpinLock<T>

pub fn lock_irq_disabled(&self) -> SpinLockGuard<'_, T>

Acquires the spin lock with disabling the local IRQs. This is the most secure locking way.

This method runs in a busy loop until the lock can be acquired. After acquiring the spin lock, all interrupts are disabled.

pub fn try_lock_irq_disabled(&self) -> Option<SpinLockGuard<'_, T>>

Tries acquiring the spin lock immedidately with disabling the local IRQs.

pub fn lock(&self) -> SpinLockGuard<'_, T>

Acquires the spin lock without disabling local IRQs.

This method is twice as fast as the lock_irq_disabled method. So prefer using this method over the lock_irq_disabled method when IRQ handlers are allowed to get executed while holding this lock. For example, if a lock is never used in the interrupt context, then it is ok to use this method in the process context.

pub fn lock_arc(self: &Arc<Self>) -> ArcSpinLockGuard<T>

Acquires the spin lock through an [Arc].

The method is similar to lock, but it doesn’t have the requirement for compile-time checked lifetimes of the lock guard.

pub fn try_lock(&self) -> Option<SpinLockGuard<'_, T>>

Tries acquiring the spin lock immedidately without disabling the local IRQs.

Trait Implementations§

impl<T: ?Sized + Debug> Debug for SpinLock<T>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl<T: ?Sized + Send> Send for SpinLock<T>

impl<T: ?Sized + Send> Sync for SpinLock<T>

Auto Trait Implementations§

impl<T> !RefUnwindSafe for SpinLock<T>

impl<T: ?Sized> Unpin for SpinLock<T>
where T: Unpin,

impl<T: ?Sized> UnwindSafe for SpinLock<T>
where T: UnwindSafe,

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> Conv for T

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of [From]<T> for U chooses to do.

impl<D> OwoColorize for D

fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>
where C: Color,

Set the foreground color generically Read more

fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>
where C: Color,

Set the background color generically. Read more

fn black<'a>(&'a self) -> FgColorDisplay<'a, Black, Self>

Change the foreground color to black

fn on_black<'a>(&'a self) -> BgColorDisplay<'a, Black, Self>

Change the background color to black

fn red<'a>(&'a self) -> FgColorDisplay<'a, Red, Self>

Change the foreground color to red

fn on_red<'a>(&'a self) -> BgColorDisplay<'a, Red, Self>

Change the background color to red

fn green<'a>(&'a self) -> FgColorDisplay<'a, Green, Self>

Change the foreground color to green

fn on_green<'a>(&'a self) -> BgColorDisplay<'a, Green, Self>

Change the background color to green

fn yellow<'a>(&'a self) -> FgColorDisplay<'a, Yellow, Self>

Change the foreground color to yellow

fn on_yellow<'a>(&'a self) -> BgColorDisplay<'a, Yellow, Self>

Change the background color to yellow

fn blue<'a>(&'a self) -> FgColorDisplay<'a, Blue, Self>

Change the foreground color to blue

fn on_blue<'a>(&'a self) -> BgColorDisplay<'a, Blue, Self>

Change the background color to blue

fn magenta<'a>(&'a self) -> FgColorDisplay<'a, Magenta, Self>

Change the foreground color to magenta

fn on_magenta<'a>(&'a self) -> BgColorDisplay<'a, Magenta, Self>

Change the background color to magenta

fn purple<'a>(&'a self) -> FgColorDisplay<'a, Magenta, Self>

Change the foreground color to purple

fn on_purple<'a>(&'a self) -> BgColorDisplay<'a, Magenta, Self>

Change the background color to purple

fn cyan<'a>(&'a self) -> FgColorDisplay<'a, Cyan, Self>

Change the foreground color to cyan

fn on_cyan<'a>(&'a self) -> BgColorDisplay<'a, Cyan, Self>

Change the background color to cyan

fn white<'a>(&'a self) -> FgColorDisplay<'a, White, Self>

Change the foreground color to white

fn on_white<'a>(&'a self) -> BgColorDisplay<'a, White, Self>

Change the background color to white

fn default_color<'a>(&'a self) -> FgColorDisplay<'a, Default, Self>

Change the foreground color to the terminal default

fn on_default_color<'a>(&'a self) -> BgColorDisplay<'a, Default, Self>

Change the background color to the terminal default

fn bright_black<'a>(&'a self) -> FgColorDisplay<'a, BrightBlack, Self>

Change the foreground color to bright black

fn on_bright_black<'a>(&'a self) -> BgColorDisplay<'a, BrightBlack, Self>

Change the background color to bright black

fn bright_red<'a>(&'a self) -> FgColorDisplay<'a, BrightRed, Self>

Change the foreground color to bright red

fn on_bright_red<'a>(&'a self) -> BgColorDisplay<'a, BrightRed, Self>

Change the background color to bright red

fn bright_green<'a>(&'a self) -> FgColorDisplay<'a, BrightGreen, Self>

Change the foreground color to bright green

fn on_bright_green<'a>(&'a self) -> BgColorDisplay<'a, BrightGreen, Self>

Change the background color to bright green

fn bright_yellow<'a>(&'a self) -> FgColorDisplay<'a, BrightYellow, Self>

Change the foreground color to bright yellow

fn on_bright_yellow<'a>(&'a self) -> BgColorDisplay<'a, BrightYellow, Self>

Change the background color to bright yellow

fn bright_blue<'a>(&'a self) -> FgColorDisplay<'a, BrightBlue, Self>

Change the foreground color to bright blue

fn on_bright_blue<'a>(&'a self) -> BgColorDisplay<'a, BrightBlue, Self>

Change the background color to bright blue

fn bright_magenta<'a>(&'a self) -> FgColorDisplay<'a, BrightMagenta, Self>

Change the foreground color to bright magenta

fn on_bright_magenta<'a>(&'a self) -> BgColorDisplay<'a, BrightMagenta, Self>

Change the background color to bright magenta

fn bright_purple<'a>(&'a self) -> FgColorDisplay<'a, BrightMagenta, Self>

Change the foreground color to bright purple

fn on_bright_purple<'a>(&'a self) -> BgColorDisplay<'a, BrightMagenta, Self>

Change the background color to bright purple

fn bright_cyan<'a>(&'a self) -> FgColorDisplay<'a, BrightCyan, Self>

Change the foreground color to bright cyan

fn on_bright_cyan<'a>(&'a self) -> BgColorDisplay<'a, BrightCyan, Self>

Change the background color to bright cyan

fn bright_white<'a>(&'a self) -> FgColorDisplay<'a, BrightWhite, Self>

Change the foreground color to bright white

fn on_bright_white<'a>(&'a self) -> BgColorDisplay<'a, BrightWhite, Self>

Change the background color to bright white

fn bold<'a>(&'a self) -> BoldDisplay<'a, Self>

Make the text bold

fn dimmed<'a>(&'a self) -> DimDisplay<'a, Self>

Make the text dim

fn italic<'a>(&'a self) -> ItalicDisplay<'a, Self>

Make the text italicized

fn underline<'a>(&'a self) -> UnderlineDisplay<'a, Self>

Make the text italicized

fn blink<'a>(&'a self) -> BlinkDisplay<'a, Self>

Make the text blink

fn blink_fast<'a>(&'a self) -> BlinkFastDisplay<'a, Self>

Make the text blink (but fast!)

fn reversed<'a>(&'a self) -> ReversedDisplay<'a, Self>

Swap the foreground and background colors

fn hidden<'a>(&'a self) -> HiddenDisplay<'a, Self>

Hide the text

fn strikethrough<'a>(&'a self) -> StrikeThroughDisplay<'a, Self>

Cross out the text

fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the foreground color at runtime. Only use if you do not know which color will be used at compile-time. If the color is constant, use either OwoColorize::fg or a color-specific method, such as OwoColorize::green, Read more

fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the background color at runtime. Only use if you do not know what color to use at compile-time. If the color is constant, use either OwoColorize::bg or a color-specific method, such as OwoColorize::on_yellow, Read more

fn fg_rgb<const R: u8, const G: u8, const B: u8>( &self ) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the foreground color to a specific RGB value.

fn bg_rgb<const R: u8, const G: u8, const B: u8>( &self ) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the background color to a specific RGB value.

fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>

Sets the foreground color to an RGB value.

fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>

Sets the background color to an RGB value.

fn style(&self, style: Style) -> Styled<&Self>

Apply a runtime-determined style

impl<T> Pipe for T
where T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> R
where Self: BorrowMut, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.

impl<T> Pointee for T

type Metadata = ()

The type for metadata in pointers and references to Self.

impl<T> TagTrait for T
where T: Pointee<Metadata = ()>,

fn dst_size(_: &Tag) -> <T as Pointee>::Metadata

Returns the amount of items in the dynamically sized portion of the DST. Note that this is not the amount of bytes. So if the dynamically sized portion is 16 bytes in size and each element is 4 bytes big, then this function must return 4.

unsafe fn from_base_tag<'a>(tag: &Tag) -> &'a Self

Creates a reference to a (dynamically sized) tag type in a safe way. DST tags need to implement a proper Self::dst_size implementation. Read more

impl<T> Tap for T

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more

fn tap_borrow(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow, B: ?Sized,

Immutable access to the Borrow of a value. Read more

fn tap_borrow_mut(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut, B: ?Sized,

Mutable access to the BorrowMut of a value. Read more

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.

fn tap_borrow_dbg(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.

fn tap_borrow_mut_dbg(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.